About This

• 3-IN-1 CUTTING MODES: Supports plate cutting, expanded-metal cutting, and rust removal — one machine for virtually every metal project. Expanded-metal mode maintains a steady arc on mesh materials for cleaner, uninterrupted cuts. Rust-clean mode quickly removes corrosion, rust, or coatings without grinding, saving time and reducing prep work. Perfect for home, workshop, or DIY use.
• ENHANCED CUTTING POWER: Built with advanced MCU control, this cutter delivers up to 60A on 220V for smooth, stable cuts on steel, stainless steel, aluminum, and more. Achieves clean cuts up to 5/8" (16mm) and max severance up to 15/16" (24mm). Easily switches between 110V and 220V, ideal for home garages and workshops. Cutting range: 12–16mm @110V, 16–24mm @220V. Current range: 20–35A on 110V and 20–60A on 220V.
• SMART AIR PRESSURE MONITORING: Equipped with a digital air pressure system, it continuously monitors incoming air and shows real-time readings on the upgraded LED panel. If pressure is too low or too high, the display shows error codes E80/E81, helping prevent poor cuts, unstable arcs, or torch damage. Keeps cuts consistent and extends consumable life. Recommended pressure: 110V: 55 PSI | 220V: 50–75 PSI.
• NON TOUCH POILT ARC: The upgraded AG60 torch delivers strong arc starting and cutting performance on rough, painted, rusty, or dirty surfaces. Its non-contact pilot arc reduces energy use and electrode wear, giving smoother, more precise cuts and up to 2× longer consumable life vs PT31. Includes two 0.9 mm and two 1.1 mm nozzles for better cut quality on 110V/220V—ready to use right out of the box. Note: Requires an external air compressor (not included).
• QUICK 1/4" NPT CONNECTOR: Features a pre-installed, metal-cased air filter with a quick-connect 1/4" NPT fitting—ready to use right out of the box. Built-in safety protections cover overload, overheat, and overcurrent conditions with clear error codes, plus an IGBT low-voltage warning. Rugged construction ensures reliable, long-term performance.
• UPGRADED LARGE LED DISPLAY: The extra-large LED screen puts all key settings in one place—current, voltage, cutting modes, 2T/4T, PA/PT, and real-time air-pressure monitoring. The bright, high-contrast display delivers crisp, vivid visuals for faster operation, safer control, and a astunning immersive cutting experience.
• PA/PT & 2T/4T FUNCTION: Supports PA (Pilot Arc) with adjustable arc time (2–10s) for cutting expanded metal and extending consumable life. PT (Postflow) time adjustable 5–15s (recommended ~8s) to cool the torch. 2T/4T modes allow hands-free operation: 2T – press and hold for short or precise cuts; 4T – press once to start, again to stop, reducing hand fatigue for long, continuous, or large cuts.